Waterproof Scuba Diving D10Pro ISS Neoprene Drysuit Female – WP-D10F-ISS

Description

The Gold Standard in Neoprene Drysuits

The Waterproof D10 PRO ISS represents the pinnacle of Swedish diving engineering. It effectively bridges the gap between the durability and insulation of neoprene and the consistent buoyancy of a shell suit.

Designed for the serious recreational or technical diver facing cold water environments, the D10 PRO addresses the two most common complaints with drysuits: seal failure and buoyancy shift. With its Integrated Silicone Seal (ISS) system and Hi-Density Neoprene, this suit offers uncompromising reliability, warmth, and a sleek, anatomical fit.

Revolutionary Features

1. ISS: Integrated Silicone Seal System

The D10 PRO comes equipped with Waterproof’s game-changing user-replaceable seal system.

• Silicone vs. Latex: Unlike traditional latex seals, silicone is hypoallergenic and boasts 100% UV and ozone resistance. It will not degrade, crack, or melt over time like latex, ensuring your suit is always dive-ready even after months of storage.

• Field Replaceable: The neck and wrists feature quick-change modular rings. If you tear a seal minutes before a dive, you can swap it out on the boat in under two minutes without tools or glue.

• The System:

  • Neck: Quick Neck Ring (soft and flexible).

  • Wrists: QCS Oval Ring System (ergonomically shaped to follow the forearm, unlike bulky round rings).

2. 3.5mm Hi-Density Neoprene

Standard neoprene compresses as you descend, leading to a loss of buoyancy and insulation. The D10 PRO uses a specialized 3.5mm Hi-Density Neoprene with a stiff “SD Toughtex” nylon lining.

• Stable Buoyancy: The dense foam resists compression at depth, meaning your buoyancy characteristics remain similar to a shell suit, but with added thermal protection.

• Tough Exterior: The SD Toughtex lining acts like a protective shield, making the suit incredibly resistant to abrasions from wrecks or rocks.

3. Anatomical Sculpting

Waterproof is famous for their fit. The suit is not just two flat pieces of neoprene sewn together; it is 3D sculpted.

• Pre-Bent Limbs: The arms and legs are pre-bent to mimic the natural swimming position, reducing fatigue.

• Gender Specific: The suit is tailored specifically for men (or women, depending on the model variant), ensuring no excess air pockets or uncomfortable tight spots.

Protection & Durability

• Kevlar® Reinforced Angled Boots: The boots are reinforced with DuPont™ Kevlar® for extreme durability. They are “angled” (cut at a slant) to reduce ankle strain while finning and minimize calf cramps.

• Polyurethane Embossed Back: The seat area features a non-slip, abrasion-resistant polyurethane embossing to protect the suit when sitting on rough boat decks.

• Kevlar® Knee Pads: Military-grade Kevlar® knee pads provide critical protection for bottom work or shore entries.

• Heavy-Duty Zipper: Features a BDM Metal Dry Zipper (Back Zip) protected by a neoprene cover (Chill Guard) to prevent dirt ingress and protect the mechanism.

Technical & Practical Utilities

• Dual Convertible Power Pockets: Located on both thighs, these expandable pockets allow you to choose between a slim profile or huge capacity. They feature heavy-duty D-rings inside for securing slates, spools, or backup lights.

• 3D Mesh Shoulder Guards: The shoulders are padded with a specialized 3D mesh. This prevents the BCD harness from compressing the suit’s insulation (keeping your shoulders warm) and provides grip to stop the BCD from sliding.

• Warm Neck System: A neoprene collar overlays the neck seal, keeping the cold water away from your neck and retaining heat. It includes drain valves to release trapped water when you surface.

• Instrument Anchors: The wrists feature a molded “I-Safe” strap anchor to keep your dive computer securely in place, preventing it from slipping down your arm as the suit compresses.

Technical Specifications

• Material: 3.5mm Hi-Density Neoprene with SD Toughtex lining

• Zipper Type: Back Zip (BDM Metal) with protective cover

• Seals: Silicone (neck and wrists) via Modular Quick-Change Systems

• Boots: Kevlar® Reinforced, Angled hard sole

• Knees: Kevlar® Reinforced pads

• Pockets: 2x Expandable Power Pockets with D-Rings

• Valves: Si-Tech swiveling inlet valve and adjustable automatic exhaust valve

• Color: Black with distinct Waterproof visuals

What is Included?

• Waterproof D10 PRO ISS Drysuit

• H1 5/7mm Hood: Includes the legendary H1 hood with the H.A.V.S (Hood Air Venting System) double-vent technology.

• Dry Bag: A branded Waterproof heavy-duty mesh bag (or carry bag depending on batch).

• Spare Kit: Typically includes one spare silicone neck seal and one spare silicone wrist seal.

• Low Pressure Hose: Standard inflator hose.

Why Choose the Waterproof D10 PRO ISS?

The D10 PRO is for the diver who wants the robust feeling of neoprene without the buoyancy headaches. It is arguably the most “worry-free” suit on the market: the seals won’t rot, the boots won’t wear out, and the neoprene won’t crush. If you dive in cold water regularly and want a suit that looks as professional as it performs, this is the investment to make.